Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.

GoPro Studio Export Failure

by GoPro ‎09-30-2019 08:55 PM - edited ‎08-06-2020 09:43 PM
What's the issue?

While trying to export in GoPro Studio, the export fails. The common failure we have seen is that it tends to hang at 0%. However, this article is valid for all export failures.


Where does it apply?
  • GoPro Studio

How to fix it?

If the export stops before 100%, try the following steps:

  1. Make sure that you have updated to the latest version of GoPro Studio.
  2. Make sure that you have plenty of space on the drive that you are exporting to.
  3. Make sure that the graphics card has the latest driver installed from the graphics card manufacturers website.  Even if the latest driver is installed, reinstall the latest driver and check if it resolves the issue.  If the latest driver will not install for some reason, try the previous most recent version. To fully uninstall and reinstall the latest graphics drivers.
    • Open the Device Manager using the steps provided for your operating system:
    • Windows XP: Start > Control Panel > Select Device Manager.
    • Windows Vista: Right click My Computer and select Manage. Navigate to the Device Manager on the side bar.
    • Windows 7: Click Start > Run, type: devmgmt.msc
    • Windows 8 and 8.1: Press the Windows key and the x key together, select Device Manager.
    • Expand the Display Adapters section.
    • Find the Intel Graphics Driver. The driver can also be called the Intel® Graphics Media Accelerator Driver (Intel® GMA Driver).
    • Right click Intel Graphics Driver and select Uninstall.
    • Select the check box Delete the driver software for this device.
    • Reboot the computer after uninstall process has finished.
    • Reinstall the latest graphics drivers 
  4. MP4 exports at resolutions higher than 1920x1080 will fail. This is a common issue if you are using time-lapse sequences. To resolve this, resize your clips to 1920x1080 during the initial conversion in Step 1.  Click on “Advanced Settings”, then adjust the “Image Size”.
  5. If there is already an MP4 with the same name in the location where you're trying to export, the export will fail. The solution is to choose a new location.
  6. If you have any non-English letters in your folder paths or filenames, the export will fail. Make sure that only English characters are used.
  7. Disable the power saving mode in Windows. If your computer is set to go into power saving mode the export will fail based off the time you set because it is telling the video card to stop sending a signal to the monitor and this can interfere with the exporting process.
    • Click the Start button. Select "Control Panel" from the Start menu pane.
    • Type "power options" into the search box. Click "Power Options."
    • Click "Show Additional Plans" in the "Select a Power Plan" section.
    • Click and enable the "High Performance" button
    • Select the blue "Change Plan Settings" link next to the High Performance setting to open the plan settings editor window.
    • Change the setting beside "Turn Off Display" to "Never" under both the "On Battery" and "Plugged In" headings. Change the setting beside "Put the Computer to Sleep" to "Never" under both headings.
    • Click "Save Changes" to implement the setting.
  8. Try Turning off User Account Control in Windows Control Panel.
  9. If the file exports to a certain point and then simply stops and ends without an error message, try exporting it in the Archive format and play it back to find which part of the video is corrupted. From there you should be able to reconvert the original .MP4 for just that section and use it without a problem.
HELP ARTICLES
JOIN A GROUP
GOPRO LABS
GOPRO WEBCAM