Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
Mounts + Accessories
Reply
Highlighted
Sightseer
Posts: 1
Accepted Solution

Problemas para emparejar con remoto

Tengo problemas para emparejar el control remoto con la cámara. 


Accepted Solutions
Highlighted
GoPro
Posts: 4,586

Re: Problemas para emparejar con remoto

@superdive57776, sorry to hear about the problem connecting your Smart Remote with multiple cameras. Typically, this connection issue can be resolved by resetting the connections on all devices. I do have some suggestions that may help. 

  1. Turn off the Smart Remote and your camera.
  2. Reset the Smart Remote by pressing and holding the Power/Mode button on the remote for about 8 to 10 seconds. Leave the remote powered OFF for the meantime. 
  3. Reset the Wi-Fi connections on your camera using the steps here.
  4. Pair the devices: 
    • Power off your remote. Power ON your camera and set it up for pairing using the instructions here.
    • Now set your camera aside and pick up the remote. 
    • With the remote powered OFF, press and hold the red Shutter button on the remote. While continuing to hold the red button, press the white Power button once briefly. The remote will power on and show two arrows moving towards each other. You can let go of the red button at this time. Now the remote is in pairing mode. 
    • At this point, the camera and remote should both show arrows moving towards each other. After one minute or less, the camera and remote should pair.
    • The remote should now mirror the camera's front LCD screen, indicating that pairing was successful. 

Hopefully this helps!

 

Ann

View solution in original post


All Replies
Highlighted
GoPro
Posts: 4,586

Re: Problemas para emparejar con remoto

@superdive57776, sorry to hear about the problem connecting your Smart Remote with multiple cameras. Typically, this connection issue can be resolved by resetting the connections on all devices. I do have some suggestions that may help. 

  1. Turn off the Smart Remote and your camera.
  2. Reset the Smart Remote by pressing and holding the Power/Mode button on the remote for about 8 to 10 seconds. Leave the remote powered OFF for the meantime. 
  3. Reset the Wi-Fi connections on your camera using the steps here.
  4. Pair the devices: 
    • Power off your remote. Power ON your camera and set it up for pairing using the instructions here.
    • Now set your camera aside and pick up the remote. 
    • With the remote powered OFF, press and hold the red Shutter button on the remote. While continuing to hold the red button, press the white Power button once briefly. The remote will power on and show two arrows moving towards each other. You can let go of the red button at this time. Now the remote is in pairing mode. 
    • At this point, the camera and remote should both show arrows moving towards each other. After one minute or less, the camera and remote should pair.
    • The remote should now mirror the camera's front LCD screen, indicating that pairing was successful. 

Hopefully this helps!

 

Ann