Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
GoPro Labs
Reply
Hiker
Posts: 31

Hero8 new firmware 2.5 – internal clock error

[ New ]

Hi all,

today I updated my H8 to lastest firmware 2.5 and put new Labs on it.

After restart and trying any of time conditions qr codes it fail, and goes into a loop.

It seams the part of internal clock is not updating while sleep and on wakeups it have same hour :( but it goes back to sleep and wakes up and over and over again (with 180s intervals)!

After cancel in menu the clock is showing the old hour :(

 

code:

mPN>06:00<21:00!180SQ~!06:00SQ!1R

displayed command:

START TIME

19:32:00

(2 mins)

button to cancel

qr log:

2021-01-26 19:29:10 74% 45c] Read QR:mPN>06:00<21:00!180SQ~!06:00SQ!1R
[2021-01-26 19:29:11 74% 45c] true 19:29 > 06:00:>06:00<21:00!180SQ~!06:00SQ!1R
[2021-01-26 19:29:11 74% 45c] true 19:29 < 21:00:<21:00!180SQ~!06:00SQ!1R
[2021-01-26 19:29:16 74% 45c] Shutdown and Sleep:180 seconds
[2021-01-26 19:29:01 100% 38c] QRShouldIWake:01
[2021-01-26 19:29:01 100% 38c] Woke with Alarm:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:02 74% 39c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:08 74% 41c] Shutdown and Sleep:178 seconds
[2021-01-26 19:29:01 100% 36c] QRShouldIWake:01
[2021-01-26 19:29:01 100% 36c] Woke with Alarm:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:02 74% 37c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:08 74% 38c] Shutdown and Sleep:178 seconds
[2021-01-26 19:29:01 100% 34c] QRShouldIWake:01
[2021-01-26 19:29:01 100% 34c] Woke with Alarm:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:02 73% 35c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:08 73% 37c] Shutdown and Sleep:178 seconds
[2021-01-26 19:29:01 100% 33c] QRShouldIWake:01
[2021-01-26 19:29:01 100% 33c] Woke with Alarm:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:02 73% 34c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:08 73% 36c] Shutdown and Sleep:178 seconds
[2021-01-26 19:29:01 100% 32c] QRShouldIWake:01
[2021-01-26 19:29:01 100% 32c] Woke with Alarm:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:02 73% 33c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:08 73% 35c] Shutdown and Sleep:178 seconds
[2021-01-26 19:29:06 73% 34c] Woke with Command:[19:32m01]!SQ~!06:00SQ!1R
[2021-01-26 19:29:07 73% 34c] Cancel:CANCEL TIME DELAY
[2021-01-26 19:29:09 73% 35c] Timer wake command:

Please help!

Maybe could I get an old LAB's firmware?

I'm having the same issue on both 2.0 and 2.5 gopro firmware.

I was able to find 2.0 gopro firmware but I don't have old LAB.

GoPro
Posts: 872

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

Never seen that.  Factory reset the camera, and set your clock. Then report back if it is fixed.

Hiker
Posts: 31

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]
Reset to factory settings, downgrade firmware to 2.0 then update via app and update with Labs but with same result.
The clock is stuck to the moment when qr code is read.
Any suggestions?
GoPro
Posts: 872

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

Show me the QR Code please.  I know log says: mPN>06:00<21:00!180SQ~!06:00SQ!1R  but I want to make sure the time and date is not imbedded in the QR Code.

 

Hiker
Posts: 31

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

qr code:

142912085_890157605080555_316891835558242605_n.jpg

 
GoPro
Posts: 872

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

Nothing wrong with the QR Code, and it works fine on my cameras (trued H8 and H9.) You might have to call support, but this is a weird one.  

Hiker
Posts: 31

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

I left gopro for whole night and when I checked the clock, it was still showing time from when i set it yesterday :(

It looks like the internal clock is failure somehow, but it happened after upgrade.

I will try to go back to 2.0 firmware without labs, factory reset camera and chcek the clock again.

Hiker
Posts: 31

Re: Hero8 new firmware 2.5 – internal clock error

[ New ]

What else I notice, is when power "ON" GoPro at 9:00, and I left it "ON" for 3 min in standby, the clock was working and show 9:03, but after power cycling GoPro, clock goes back to 9:00.

Is there any chance to code clock permanently? using ex. metadata?

What I done before all that mess, was put the qr code for reading qr codes while recording with the code !MQRDR=1