Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
GoPro Labs
Reply
Sightseer
Posts: 2

GPS Speed activation

[ New ]

Hello.

 

I would like to create a QR code for video recording based on GPS Speed activation.

It is listed as a feature here:https://community.gopro.com/t5/en/Using-QR-Control-on-HERO8-Black/ta-p/603196#Speed%20activation

I do not see how I can set it even with the custom commands.

 

Can you provide some examples?

 

Thanks

Joe

GoPro
Posts: 797

Re: GPS Speed activation

[ New ]
Sightseer
Posts: 2

Re: GPS Speed activation

[ New ]

Thanks.  I don't see it in the iPhone QR Control app.  Can it be set in the app?

GoPro
Posts: 797

Re: GPS Speed activation

[ New ]

On speed control starts in the app yet, you might be the first to ask for it.  

GoPro
Posts: 797

Re: GPS Speed activation

[ New ]

You can also type it in manually.  !SK<speed in kmh>H<hold in seconds>!R  

 

The above example is: !SK10H20!R

Hiker
Posts: 38

Re: GPS Speed activation

[ New ]

In the example used: !SK10H20!R 

--!S  = START now

--K10H20  = Start record at 10kph and hold for 20s  "K" is the actual command???

--!R

 

Is it safe to say: 

  1.  Recording is active for speeed 40kph to 0(stop)?

  2. The camera commands can be placed in the command where I choose?

               i.e. !SmTr27Tp.15K400!R

 

Hiker
Posts: 38

Re: GPS Speed activation

[ New ]

Original message timed out and cut off.  Sorry for being slow!

 

In the example used: !SK10H20!R 

--!S  = START now

--K10H20  = Start record at 10kph and hold for 20s 

--!R

 

 

!SK400!R  (US START at 40kph (25mph) Stop at 0kph)

Is it safe to say: 

  1. Recording is active for speeed (K400) 40kph(begin) to 0kph(stop)?  Correct or Wrong???

  2. Or, do I need the dash "-" as in !SK40-0!R or NOT as in !SK400!R

  3. May the camera commands be placed in the command where I choose?  Or NOT?

       ------my desired example     mTr27Tp.15!SK400!R   Good example or NOT Good example???

  4. The entire command is repeated again and again and again 

       --Traffic light and don't want continuous recording.

       --

  5.  a.  Within the original command "H" is only used to hold for x-seconds then command repeat.   CORRECT? or WRONG?

       b.  Within my command "-" is used to seperate start and stop recording, 40-0.  CORRECT? or WRONG?

  6.  "K" is the actual command?  CORRECT or WRONG?

GoPro
Posts: 797

Re: GPS Speed activation

[ New ]
K is not the command. !SK is. !S is pressing the shutter button. !SK is capture at a speed in Km/h. Yes you need the -, otherwise you are saying start at 400km/h