encendido por voz no funciona [ New ]

[bluetree35044]

Hola amigos me llamo Víctor y tengo el problema que la cámara no enciende con el comando por voz

el resto de los comandos por voz funcionan bien,

si alguien me puede orientar se los agradeceré.

saludos cordiales

[mariustanya · Accepted solution]

Hello @bluetree35044. Make sure that the Wake On Voice is enabled as well. With this setting, your GoPro will turn on and respond to voice commands when it’s off. To do this, please see steps below:

1. Swipe down to access the Dashboard.

2. Tap to turn on Voice Control.

3. Tap Preferences > Voice Control > Wake on Voice.

4. Power off your camera by saying “GoPro turn off” or pressing the Mode button .

5. Turn on your camera by saying “GoPro turn on” or “GoPro start recording.”

Heads Up: Your camera will listen for commands for 8 hours after you’ve turned it off.

[mariustanya · Accepted solution]

Hello @bluetree35044. Make sure that the Wake On Voice is enabled as well. With this setting, your GoPro will turn on and respond to voice commands when it’s off. To do this, please see steps below:

1. Swipe down to access the Dashboard.

2. Tap to turn on Voice Control.

3. Tap Preferences > Voice Control > Wake on Voice.

4. Power off your camera by saying “GoPro turn off” or pressing the Mode button .

5. Turn on your camera by saying “GoPro turn on” or “GoPro start recording.”

Heads Up: Your camera will listen for commands for 8 hours after you’ve turned it off.

[bluetree35044]

Muchas gracias

saludos cordiales