Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
Cameras
Reply
Highlighted
Tourist
Posts: 2

Problemas con FPS y camara lenta HERO 8 Black

buenas a todos, estoy teniendo diversos problemas y es que creo modos de video 2.7k 50 fps y por defecto me activa la camara lenta, si la desactivo me lo baja a 25, no se porque pasa esto.

 

tambien acabo de actualizar a la 1.5 en la que pone que se puede usar 4k 60/50fps objetivo lineal con hypersmooth 2.0 y no me deja activarlo.

 

la verdad llevo 1 dia con la camara y me esta frustrando tremendamente el que cree modos de video que en sus especificaciones dice que son compatibles con hypersmooth y no me deja crearlas....

Highlighted
Backpacker
Posts: 803

Re: Problemas con FPS y camara lenta HERO 8 Black

[ Edited ]

hi,

please pay attention to all details.

 

slo-mo is actually "double the already set fps"...if the resolution+lens allow it.

 

basically the camera monitor will tell you what is compatible between settings, and what is not.



resolution 2.7K 4:3 or 16:9?

 

 

 

  • at 2.7K 4:3 , 50fps is the maximum... therefore the "slo-mo" is On on the screen shortcut
  • if you hit "slo-mo" will be 25fps.

 

  • at 2.7K (16:9) 100fps is the maximum...so if you set 2.7K 50fps  the "slo-mo" is Off on the screen shortcut
  • if now you activate "slo-mo" you will get 2.7K 100fps
  • if you set 2.7K 100fps from the beginning "slo-mo" will be on, etc. 

 

  • as per 4K 50fps linear hypersmooth.
  • it is here in 1.50 (was not before)  hypersmooth=on.
  • keep in mind hypersmooth has four possibilities : off, on, high, boost
  • the "boost" shortcut on the screen is only for "boost"  from the already set hypersmooth  (off or on or high)

 

hope this helps,

robert

 

Highlighted
Backpacker
Posts: 803

Re: Problemas con FPS y camara lenta HERO 8 Black

I've added something:

 

  • if not supported at res+fps+lens
    • any shortcut will be gray
    • any settings will be "lowered" to the max supported in this situation, and will be underlined yellow in preset settings.

 

 

hope this helps,

robert