Ask a Question
GoPro Support Hub Find a solution. Share a solution. Ask a question. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
Cameras
Reply
Highlighted
Tourist
Posts: 1
Accepted Solution

Mi gopro hero 7 black se cambia sola de modo foto a modo video cuando la meto en el agua

Mi gopro hero 7 black se cambia sola de modo foto a modo video cuando la meto en el agua a veces también se cambia a modo de configuracion esto me pasa solo cuando la meto al agua quisiera saber si esto es normal o alguna falla de la gopro

Accepted Solutions
GoPro
Posts: 4,949

Re: Mi gopro hero 7 black se cambia sola de modo foto a modo video cuando la meto en el agua

This is the first time I have heard about such an issue. Thank you for bringing this to our attention, @boldbeach22056. If you have not tried it yet, have the Auto Lock feature on and lock the rear screen prior to getting into the water. This way, we can isolate if the problem is the camera itself, or if the issue is a result of water waves (or pressure) causing pressure on the screen causing a change in mode. 

 

When the Lock Screen is on, you will still be able to navigate through the camera through the following steps:

To change Modes (video, picture, time lapse) press the side Mode/power button when the camera is not recording.
To access settings, Press the Mode/power button and shutter when the camera is not recording and the settings menu will display on the front LCD.
To unlock the rear LCD, turn the camera on (if not already on) and swipe down on the rear LCD and chose unlock.

 

Let us know how it goes. Many thanks!

View solution in original post


All Replies
GoPro
Posts: 4,949

Re: Mi gopro hero 7 black se cambia sola de modo foto a modo video cuando la meto en el agua

This is the first time I have heard about such an issue. Thank you for bringing this to our attention, @boldbeach22056. If you have not tried it yet, have the Auto Lock feature on and lock the rear screen prior to getting into the water. This way, we can isolate if the problem is the camera itself, or if the issue is a result of water waves (or pressure) causing pressure on the screen causing a change in mode. 

 

When the Lock Screen is on, you will still be able to navigate through the camera through the following steps:

To change Modes (video, picture, time lapse) press the side Mode/power button when the camera is not recording.
To access settings, Press the Mode/power button and shutter when the camera is not recording and the settings menu will display on the front LCD.
To unlock the rear LCD, turn the camera on (if not already on) and swipe down on the rear LCD and chose unlock.

 

Let us know how it goes. Many thanks!