01-06-2018 03:15 AM
My new Gopro hero black 6 is freezing everytime I turn superview on. The ledscreen goes black and I have to remove the battery and power on again. I have a 32 sandisk class 10 100 which should "work with Gopro". Yhe only way I can go around the problem is if I turn the autorotation to "down", than superview works fine. I have v01.60.
Is this a known bug or is it something wrong with my unit?
01-06-2018 10:07 PM
@hebkehammer - Does it freeze when superview is turned on, or when you start to record in superview? If it's when superview is turned on, try taking out the SD card and seeing if the issue happens then.
If it does, then be sure to check that the camera's firmware is up to date by doing a manual update on the firmware. Even if the camera says it's on 1.60, there could have been issues with that installation that a manual update can correct. Instructions are at https://gopro.com/update/hero6.
01-14-2018 08:12 PM
I also have this issue: in any resolution superview mode when the camera is in an upright position, it hard freezes as soon as you press record.
If you hold the camera upside down, it records successfully in superview mode.
Very frustrating having to waste so much time debugging what should be a fully functional product.