Ask a Question
GoPro Support Hub Ask a question. Share an answer. Find a solution. Stay stoked.
Announcements
Is your GoPro gear up to date? Check to see If it is on our Update page.
Cameras
Reply
Highlighted
Explorer
Posts: 13,000

Re: Experience so far with the 1.61 firmware

@agilepike07081

If the app auto downloads the media ("Looks like you have new media...", or you pull down to retrieve) the media gets saved temporarily in the RECENT section.  It can be confusing since if you initiate a download (through the gallery) it does not show under the RECENT tab, but where your other media is located (where ever you placed it on your phone).  Is that what you are asking?

Highlighted
Tourist
Posts: 9

Re: Experience so far with the 1.61 firmware

OK, thanks for that. If I download automaticaly, I cannot find anything in the phones file manager until I save it to the recent tab. At that point everything is visable to the file manager.

 

Cheers.

Highlighted
Tourist
Posts: 14

Re: Experience so far with the 1.61 firmware

Yep I've experienced one of the negatives where the camera won't turn on either via Power Mode Button or by Quick Capture. I've had this issue ever since I got the camera, even with the previous firmware update. I even manually updated my GoPro 7 Black. It's random. I dunno if it's because the camera gets hot under the sun or what, I have no idea. I mostly use my gopro for Motovlogging on my motorcycle. But it's random. I've had it not turn on via Quick Capture or the Power Mode Button once, and I was also forced to remove the battery and place it back in to power it on. 

C'mon Gopro please fix this. 

Highlighted
Adventurer
Posts: 13,375

Re: Experience so far with the 1.61 firmware

Yeah I charged my H6B from 93% and My H7B 98% who  won H6B b/c H7B led stayed on  never knowing it was already finished and off.  Random,  happens a little moret hen random.

Highlighted
Hiker
Posts: 32

Betreff: Experience so far with the 1.61 firmware

2 Times today Camera didnt reacting to anything ... Frozen completly ... only put the battery out was helping .. this sucks ...
Highlighted
Adventurer
Posts: 13,375

Betreff: Experience so far with the 1.61 firmware

Yes learning that the led is gopros issue I jsut unplug when I think I am near.

Highlighted
Hiker
Posts: 90

Re: Experience so far with the 1.61 firmware


@andreis40011 wrote:

So I tested the new firmware today and this is what I found:

Positives

+ they definitely tweaked something in regards to noise reduction, 1080p quality looks better, noise reduction is not so strong or is better managed but it's still not on par with Hero 6 black in my opinion but nevertheles it is at least usable now. Timewarp in 1080p it's miles better and here it's were you will see better compression and detail;

+ navigating through menus it's definitely improved by a long shot;

+ hypersmooth is better in low light but at a cost of being less effective, I am curious how it performs on a forest trail where lot's of mountain bikers where complaining on this issue (here it's where a minimum shutter speed would be handy);

+ slow panning shots are possible now but I would not say they are completly eradicated. Sometimes the algorithm fails and you see the hiccup altough not as jarring as in the previous firmware. But when it works it works.

 

Negatives

- it happened twice that the camera won't start when pressing the on button, and I was forced to pull off the battery to make it work again. I will keep an eye and see if it's something that happens regularly.

- in livestreaming using phone hotspot, I saw a more compressed image on uploaded footage on facebook and an occasional intreruption but it could be a problem on my end with the signal, got to test it further.

- navigating through menus, altough much improved, I have encountered a freeze in scrooling, it would not scrooll trying to change protune settings. This happened once.

 

I think this is a pretty good update but they definitely should not stop here. More tweaking on 1080p quality and a selection of stabilization levels on all resolution (Hypersmooth, Hero 6 stabilization and off) should be taken in consideration in the next update in my opinion. And also they should really implement a minimum shutter speed setting.

 

NOTE: I have manually updated and did a full reset.


So I feel I should give an update after a more extensive testing:

- 1080p quality doesn't seem to have changed in any significant way over the previous frmware. Hero 6 better handles detail at this resolution. Timewarp in 1080 still to me looks better, offering a better compression since the previous firmware. One note I should add is that the last time I have tested 1080p timewarp was in summer and I know small cameras have a more hard time compresing foliage. Now is full time winter and maybe that is why to me it seems better.

- After listening to advice from danielr (full format my card->manually update camera->format card in camera->full reset) the problem of device not turning on never appeared again so this advice should be sticked somewhere around here to be available always. Also I have not experienced freezing in menus again.

- live streaming is ok but, there is a "problem" wich I don't remenber the previous firmware had because I never used it that much: at the 2 or 3 second mark, there is always a 1 or 2 second stutter (no matter if I use phone hotspot or wireless router connection). After this initial stutter everything works fine and the quality is as I expect it to be.

- There seems to be some battery drain even with connections, gps, voice control, quick record off. I would say an average of 5% overnight. But it doesn't alwas manifest. I must note that I have 3 original batteries wich I constantly rotate so can't say if one is faulty, but I don't remember having observed this with the previous firmware. Sometimes it doesn't drain at all, sometimes overnight it drains 5%-10% and if I check again later in the day it seems to not drain further or it drains like 1%. I will do more testing without the card, the same battery and with no battery in over night over a longer period of time. I also have the dual charger and I am in the habbit of charging them this way instead of the camera. I will only charge the batteries using the camera over a period of time since I suspect the firmware needs to calibrate itself.

 

So I am partially happy of this update, I'm definitely glad that they somehow made panning better and hypersmooth in low light better too, but my biggest gripe with this camera was the 1080p quality which is not fixed. Hope the battery drain is someting that will resolve itself.

Highlighted
Tourist
Posts: 6

Re: Experience so far with the 1.61 firmware

I started a thread but my new H7 Black rear LCD flickers and I can’t playback 4K video as I get a gray choppy screen in VLC Player.